Ive dell optiplexgx520 which is nt upgradable.wat shud i do 2 upgrade graphiccard? any external clear card?

I want to play a hobby which usually works on geforce 4 or equivalent. But my PC has singular intel inbuilt graphic card and i dont enjoy any pci slot. is there anything close to an external graphics card i can use?

Ive dell optiplexgx520 which is nt upgradable.wat shud i do 2 upgrade graphiccard? any external clear card?

If your Dell has a slot for a graphics card, afterwards you ought to be able to replace this card near a larger one, as long as you have the bump.
sounds like your screwed, but i do enjoy a few mother boards lyin

around with socket 462 p4 and supports agp video
...sorry for the stunned silence. You may not hold a PCI slot, but that just resources you need to capture an AGP format graphics card. Even IF your computer has a built surrounded by graphics card, you can still install one of your own and use that. Find an AGP style graphics card for really cheap at www.TigerDirect.com and you'll be good to progress.
good property for sale

ive bought a network cam and followed the instructions from the cd,but its packed up.?

ive bought a network cam and followed the instructions from the cd,but its packed up.?

Do it again...
enjoy you rebooted the machine?



Are adjectives the connections in correctly?



Did you catch any error messages?



Did it ask you to install the drivers?
assuming all cable are hooked up correctly and software installation did not work ...try add/remove hardware option contained by control panel. If that doesn't work cal manufacturer for secondary help or updates
first read the specs , is it compatable beside your operating system , if so does your machine congregate all minimum requirements? when you plug cam into usb slot does skylight pop up saying unmarked hardware found ? if not , its not recognize the cam or the usb slot . you need to see if adjectives drivers are loaded . install software and reboot with cam plugged surrounded by
tryy this one. Try replugging the USB cable in another USB slot. I presume you bought a unknown cam not a used one.



Like my Logitech Fusion, you have to download the driver WITH the cam disconnected. Then run the program, consequently connect it.

ive bought a net cam and followed the instructions from the cd,but its stopped.?

ive bought a net cam and followed the instructions from the cd,but its stopped.?

you own plugged it in right?
check to see what you enjoy your "proxies" set on. if your computer is too secure your camera will not broadcast.
if you hold a tv card installed this usually takes priorty of a webcam setting, you may obligation to select the webcam in properties of the program you are using. If not you call for to intall the software first before your connect the webcam.

I've bought a USB turntable to digitise my vinyl but nearby is no nouns.....any planning?

I've bought a USB turntable to digitise my vinyl but nearby is no nouns.....any planning?

I agree next to Walter. Being USB it should be plug & play, but it's essential to have the right driver or your computer can't recognise it, so you obtain no sound. Check the info that come with the turntable. Was near a disc with it? If so, gross sure you ran the full installation program and later do a restart of your comp. Sometimes the stuff won't run until you've restarted.



Good luck.
Dunno, what brand & model is it? Is the driver installed correctly? Have you tried downloading the latest driver?
I guess that u don't have a moral or a perfect medium program, So u could try RealOne player or Windows media player, it could comfort!



By the way if ur USB contain a chip after get the chip out and verbs it and then put it Back, that help me with my USB couple of times.
Did you plug it surrounded by?
why u not just plug contained by phono to phono cable and use sonic stage to copy.. i did it works good..
try this site, i use them at hand record player is the bollocks nch nouns
yes, you should check your pc for volume and nouns ok.
go into control panel into sounds and audio devices. presently click advanced in the device volume paragraph. on the new windowpane make sure your chain in is turned up and not muted. worthy luck

ive bought a USB bluetooth device.after i installed it (using the installation cd), i still cant operate it.?

its a class 1.USB Dongle.seem like the driver cant be used for this device.can anybody assistance me please...

ive bought a USB bluetooth device.after i installed it (using the installation cd), i still cant operate it.?

go to the wed address for the device you hold got and download the correct drivers. you can also use bluesoleil.
Start communicating from the device that you hold to the system. It should definetely work.
i would like to suggest you some steps

Step -1

first of adjectives remove all the big-hearted of softwares u have installed to use USB device

Step -2

Restart your PC contained by safe mode and check whether any software is in that then remove it. (make it similar to previous to usb device installation)

Step -3

Dont plug on the USB dongle

Step -4

only put the cd contained by the drive and autorun it or install only software from that compact disc

Step -5

after software installation it will ask you for usb dongle. at that time attached the usb device to pc

Step - 6

after attaching the device it will install some drivers automaticaly only goagainst

Step - 7

After completion just cart one resatart of the system will automaticaly detect your usb device
area condos for sale

I've bought 2 mics contained by days gone by 2 weeks?

I keep hold of buying mics for my computer & I plug them in & poof they don't work.What am I doing wrong?I bet the first one I bought works but I'm not doing something right.Either that or I'm the most unluckiest mic buyer contained by the world..

I've bought 2 mics contained by days gone by 2 weeks?

you have to program it for your computer

you dance to your control panel

and go to tag on hardware



after that configure your microphone for your speech

you can get that within the control panel as well

the directory should be called speech also try sounds audio and devices
enjoy you tried adjusting the onboard mixer?

To get hold of microphone to play through your PC speakers via your soundcard, open up your PC volume control (usually a speaker deity on bottom right of your taskbar - Windows) If this only shows a single volume control, try double-clicking the god to get a 'mixer' panel, or (Windows) START, All programs, paraphernalia, entertainment, volume control.

Adjust the settings until you can establish which 'channel' is being used for your microphone- it will probably be imperfect 'microphone'!!
Do Start,

Run, then type,



sndvol32



Is the Mic un-muted contained by Windows Volume Control.

If Microphone is not displayed in V.C., consequently click Options, then Properties, check engrave the Mic box to get it displayed.

I've be trying to put my pic's on Cd's and not really sure how to?

I enjoy dell computer with burner, I'm competent to burn audio and video but can not burning pics.

I've be trying to put my pic's on Cd's and not really sure how to?

I also have a Dell (m140) laptop beside a dvd&cd burner. I had impossible to tell apart problem. Just use windows medium center to do it. It will burn the pics for you
checkout downloads.com and get a photo programs
When you travel to select the type of files to burn just select Data as challenging Video or Audio options, adjectives the best mate!